Huawei AR150 Series Configuration Manual page 73

Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
Figure 3-9 Networking diagram for outputting logs to a log host
10.1.1.2/24
Server 4
10.2.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Procedure
Step 1 Enable the information center.
<Huawei> system-view
[Huawei] sysname Router
[Router] info-center enable
Step 2 Configure a channel and a rule for outputting logs to a log host.
# Name channels.
[Router] info-center channel 6 name loghost1
[Router] info-center channel 7 name loghost2
# Configure channels for outputting logs to log hosts.
[Router] info-center loghost 10.1.1.1 channel loghost1
[Router] info-center loghost 10.2.1.1 channel loghost2
[Router] info-center loghost 10.1.1.2 channel loghost1
[Router] info-center loghost 10.2.1.2 channel loghost2
# Configure rules for outputting logs to log hosts.
[Router] info-center source fib channel loghost1 log level notification
[Router] info-center source ip channel loghost1 log level notification
[Router] info-center source ppp channel loghost2 log level warning
[Router] info-center source aaa channel loghost2 log level warning
Step 3 Specify the source interface for sending logs.
# Specify the source interface for sending logs.
Issue 05 (2014-01-16)
10.1.1.1/24
Server1
Server 3
Server 2
10.2.1.1/24
Enable the information center.
Configure the Router to send notification logs generated by the FIB module and IP module
to Server1, and specify Server3 as the backup of Server1. Configure the Router to send
warning logs generated by the PPP module and AAA module to Server2, and specify
Server4 as the backup of Server2.
Configure the log host on the server so that the network administrator can receive logs
generated by the Router on the log host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
172.16.0.1/24
Router
3 Information Center Configuration
64