Neopost ij25 User Manual page 2

Hereby, Neopost declares that this Franking Machine is in compliance with the Essential
Requirements and other provisions of Directive 1999/5/EC. A full copy of this Declaration
may be found at www.neopost.co.uk/docs/IJ25compliance.htm
This equipment contains a modem which has been approved in accordance with Council
Decision 98/482/EC-CTR21 for pan-European single terminal connection to the Public
Switched Telephone Network (PSTN). However, due to differences between individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point.
The modem is designed to work on analogue telephone lines only
In the event of problems, you should contact your equipment supplier in the first
instance.
The mains plug on this equipment is intended to serve as the device for isolation of the
mains supply. The equipment should be installed in close proximity to easily accessible
power supply and analogue telephone sockets.
DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO REMOVE
THE POWER SUPPLY OR FRANKING MACHINE COVERS.
THERE ARE NO OPERATOR SERVICEABLE PARTS THEREUNDER.
No part of this document may be reproduced or transmitted in
any form or by means, electronic or mechanical, for any purpose
without the express written permission of Neopost Limited.
MODEM APPROVAL REQUIREMENTS
INSTALLATION
WARNING
Copyright© Neopost Limited 2001