Advertisement
Quick Links
Page 1 of 4
IJ-25, WJ20 - Replacing The Ink Cartridge
The unit must be powered on when replacing the Ink Cartridge.
View 1
View 2
View 3
To replace the Ink Cartridge on the IJ-25, WJ20 follow these
steps:
1. From Ready mode press MENU and scroll (< >) until the display reads CARTRIDGE.
2. Press OK to confirm.
3. Scroll (< >) to REMOVE.
4. Press OK to confirm. The display will read:
5. Open the machine top cover upwards to gain access to the Ink Cartridge.
Advertisement
Related Manuals for Neopost WJ20
Summary of Contents for Neopost WJ20
- Page 1 The unit must be powered on when replacing the Ink Cartridge. View 1 View 2 View 3 To replace the Ink Cartridge on the IJ-25, WJ20 follow these steps: 1. From Ready mode press MENU and scroll (< >) until the display reads CARTRIDGE. 2. Press OK to confirm.
- Page 2 Page 2 of 4 6. Open the blue latch to the right to release the Ink Cartridge. 7. Remove the Ink Cartridge by gripping the top as shown and pulling out.
- Page 3 Page 3 of 4 8. Remove the new cartridge from its packaging and remove the blue tape that protects that Ink Cartridge. 9. Place the new cartridge into its holder and press gently at the bottom of the cartridge with your thumb until it is fully inserted into the machine.
- Page 4 Page 4 of 4 11. Close the top cover and press OK. You may now be prompted to run a Test Print.
Need help?
Do you have a question about the WJ20 and is the answer not in the manual?
Questions and answers