Table of Contents
Advertisement
REPLACING AN INK CARTRIDGE
Carefully withdraw the used cartridge and discard.
Remove the new cartridge from its packaging
and peel off the Blue tape seal that protects
the print head.
Place the new cartridge into its holder as
illustrated, close the blue latch and press
gently until it locks the cartridge in place.
Close the top cover and press:
The following display will now be observed
PLEASE WAIT...
Notes:
The ink charging process may take a short while to complete, during this time the
machine may produce some mechanical sounds, this is normal.
Once installed, do not open the latch again until you need to fit a new cartridge.
If the ink cartridge is not installed properly the machine will not work.
You will be prompted to produce a test print:
INSERT ITEM
Insert a blank envelope or card to make a test print
The following display will now be observed:
ALIGNMENT
Now enter the number that corresponds to the
5
straightest vertical line (for the example above: - line 5).
Press
to return to Ready mode.
Franking Machine User's Guide
17
Hide quick links:
Advertisement
Table of Contents
