Changing The Paper Size Of The Drawer / Setting The Drawer For Special Uses - Toshiba e-STUDIO211c Operator's Manual

2. SETTING COPY PAPER (Cont.)

Changing the Paper Size of the Drawer / Setting the Drawer for Special Uses

1 The paper size of the drawers of the copier can be changed. The drawers can also be set for THIN,
THICK1 paper or OHP films.
* Bypass copying
2
1 Pull out the drawer toward you.
3
2 Push the lever of the side guides in the direction of
the arrow, and set the side guides at the desired pa-
per width (indicated on the bottom surface of the
4
drawer).
5
3 Push the lever in the direction of the arrow, set the
back guide to the desired paper size (indicated on
the bottom surface of the drawer).
6
4 Place paper in the drawer.
7
5 Adjust the size mark plate to match with the size of
paper that has been set.
8
6
Install the drawer into the copier.
9
10
7 Press the
menu. Then press the CASSETTE key.
11
12
2-6
HOW TO MAKE COPIES
Page 6-5
Page 9-3 (step 2)
PROGRAM key to enter the program