How To Enter The Maintenance Mode Exclusive To Service Personnel; Key Operation In Maintenance Mode; Entering A Desired Function Code At The Initial Stage Of The Maintenance Mode - Brother DCPJ525W Service Manual

Hide thumbs Also See for DCPJ525W:
Table of Contents

Advertisement

1.1.2 How to Enter the Maintenance Mode Exclusive to Service Personnel

(1) Models with
Press the
(Mono Start) key, then press the Color Start key four times.
Models without
Press the Menu and Black Start (Mono Start) keys in this order, then press the
four times.
Tip: Either of the following operations also makes the machine enter the maintenance
mode.
- Press the Menu, *, 2, 8, 6 and 4 keys in this order, in the same way as conventional
models.
- While holding down the Black Start (Mono Start) key, plug the power cord into an
electrical outlet.
(2) Wait for the machine to beep for approx. one second (only MFC) and display
"
entry from the keys. Enter the desired function code.
(3) To quit the maintenance mode operation in midway and switch to the initial stage of the
maintenance mode, press the Stop/Exit key. When each of the user-accessible functions is
completed, the machine automatically returns to the initial stage of the maintenance mode.
1.2

Key Operation in Maintenance Mode

Keys to be used in the maintenance mode differ depending upon the model's control panel
specification.

1.2.1 Entering a Desired Function Code at the Initial Stage of the Maintenance Mode

Models with numerical keypad
Use the numerical keypad to enter the corresponding 2-digit function code.
(Example) To select Function code 80, press the 8 and 0 keys in this order.
Models without numerical keypad
Use the numerical keypad (software keypad) on the touch panel to enter the corresponding 2-
digit function code.
(Example) To select Function code 80, press the 8 and 0 keys on the touch panel in this order.
The details of each maintenance-mode function are described in
Notes
• To exit from the maintenance mode and switch to standby, press the 9 key twice in
the initial stage of the maintenance mode.
• Pressing the Stop/Exit key after entering only one digit restores the machine to
the initial stage of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage of the
maintenance mode.
key
and Black Start (Mono Start) keys simultaneously. Press the Black Start
key
" on the LCD, indicating that the machine is ready to accept
5-2
Section 1.4
in this chapter.
key
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents