4
TROUBLESHOOTING
4.1
Error Cause and Solutions
First see the user check items. If it cannot recover the machine, proceed to the troubleshooting
table exclusive to service personnel.
Error Code 0E
Paper Jam
In duplex printing, a sensor error has occurred during printing on the second side. (During
switchbacking, the registration sensor outputs an unexpected signal.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
- Check that the recording paper is not curled..
Step
1
Registration actuator caught on
the surrounding parts
2
Registration sensor defective
3
Main PCB defective
Cause
Check and reposition the registration actuator.
Replace the registration sensor PCB ASSY.
Replace the main PCB ASSY.
2-21
LCD
Solution
Confidential