Recording Paper Size Error. (During Fax/List Printing) (The Paper Size Not Suitable For Recording - Brother DCPJ525W Service Manual

Error Code 80
Wrong Paper Size

Recording paper size error. (During fax/list printing) (The paper size not suitable for recording

fax was detected by the paper width sensor or registration sensor.)
User Check
- Check whether the recording paper being used is within the specification.
- Check that the dark recording paper is not used.
Step
1 Registration actuator caught on
the surrounding parts
2 CR encoder strip stained
3 PF encoder disc stained
4 Registration sensor defective
5 Carriage motor defective
6 Paper feed motor defective
7 Paper width sensor defective
8 Main PCB defective
Cause
Check and reposition the registration actuator.
Replace the CR encoder strip.
Replace the PF encoder disc and clean the flushing
guide. Refer to
Replace the registration sensor PCB ASSY.
Replace the carriage motor.
Replace the paper feed motor.
Replace the carriage PCB ASSY.
Replace the main PCB ASSY.
2-43
Solution
Chapter 3, Section 1.
LCD
Confidential