Method Of Entering Maintenance Mode For Service Personnel - Brother DCP-1510 Service Manual

1.1.2 Method of entering maintenance mode for service personnel

<Operating Procedure>
(1) While the machine is in the ready state, press the [Menu], [Start], [
buttons in this order. "
machine enters to the initial state of maintenance mode.
(2) Ten-key pad models
Use the ten-key pad to enter the maintenance mode function code to be executed.
Non-ten-key pad models
Press the [
executed on the LCD and press the [OK] button.
(3) Enter the maintenance mode function code to be executed.
Note:
• When the [9] button is pressed twice continuously while the machine is in the initial state
of maintenance mode, the machine returns to the ready state.
• When the [Stop] button is pressed after the first digit of the number has been entered,
the machine returns to the initial state of maintenance mode.
• When an invalid maintenance code is entered, the machine returns to the initial state of
maintenance mode.
• As for the models with a handset, when the handset is not placed on the handset holder,
" MAINTENANCE
MAINTENANCE
] or [ ] button to display the maintenance mode function code to be
" is not displayed and "Telephone" is displayed on the LCD.
" is displayed on the LCD and the
4-2
], [ ], [ ] and [ ]
Confidential