If You Replace The Adf Or Adf-Related Parts; Print Out An Adf Copy Chart And Make A Copy Of That Chart In Adf Scanning - Brother DCPJ525W Service Manual

3

IF YOU REPLACE THE ADF OR ADF-RELATED PARTS

3.1 Print out an ADF copy chart and make a copy of that chart in ADF
scanning
(1) Switch the machine to the maintenance mode. (Refer to
Before starting the operation below, be sure to set letter-size paper in the paper tray for
printing and making a copy of the check pattern. To get the accurate print data, we suggest
using the Brother genuine plain paper PB60 or other higher quality one (DO NOT USE
glossy paper).
(2) Connect the machine to your PC with a USB cable.
(3) On the PC, run "filedg32.exe" in the folder created.
The Filedrgs window appears as shown below.
(4) Drag and drop the "chart.prn" onto the Brother Maintenance USB Printer driver icon in the
Filedrgs window shown above.
The machine displays the "Receiving Data" on the LCD and prints out the "ADF COPY
CHART" (see
Note: If the print quality on the ADF COPY CHART is poor, perform head cleaning and
then print it again.
Tip: The print pattern can also be printed with Function code 61 (refer to
Section 1.4.19). After printing with a memory card, be sure to remove the card before
proceeding to the following step.
(5) Press the 9 key twice to return to standby.
Wait for the printed chart to dry well.
(6) Fully insert the top edge of the printed "ADF COPY CHART" facing down into the ADF,
then fit the document guides to the document size.
Press the Copy key, set the copy quality mode to "Best" and press the Color Start key to
make a copy.
Note: Check that the document does not skew.
Note: During copying, do not touch the document to prevent printed images from
displacement.
page 4-28 for a sample printout).
Chapter
4-26
5.)
Chapter 5,
Confidential