Retrieving The Equipment Log Information - Brother DCPJ525W Service Manual

Hide thumbs Also See for DCPJ525W:
Table of Contents

Advertisement

2.4

Retrieving the Equipment Log Information

Function
This procedure retrieves the log information from the machine to the connected PC as
electronic data.
Operating Procedure
(1) Make sure that the power cord of the machine is unplugged from an electrical outlet.
If the machine is connected to a PC, disconnect the USB cable.
(2) Switch your PC on.
(3) Create an arbitrary folder in the C: directory and save the readback tool (rb2k03.exe) and
PJL command file (brmainten_77.pjl) in that folder.
(4) Plug the power cord of the machine into an electrical outlet to turn the power on.
(5)
Switch the machine to the maintenance mode. (Refer to
(6) Connect the machine to the PC using a USB cable.
(7) On the PC, start Command Prompt and change to the directory where the readback tool is
located.
(In the example below, a "SendPJL" folder is created in the C: directory and the readback
tool is saved in that folder.)
(8) In Command Prompt, type
press the Enter key.
Note: Be sure to enter a space to the points marked with an asterisk (*) shown below.
rb2k03.exe*brmainten_77.pjl*brmainten_77.txt*/T3
Otherwise, an error occurs.
brmainten_77.txt
(9) In Excel, open the created text and delete texts added by the PJL stipulation.
rb2k03.exe brmainten_77.pjl brmainten_77.txt /T3
is created in the arbitrary folder.
5-79
Section 1.1
in this chapter.)
and
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents