Brother DCPJ525W Service Manual page 61

Code 1 Code 2
32 01 Remote terminal only with V.29 capability in 2400 or
4800 bps transmission.
32 02 Remote terminal not ready for polling.
32 10 Remote terminal not equipped with password
function or its password switch OFF.
32 11 Remote terminal not equipped with or not ready for
confidential mailbox function.
32 12 Remote terminal not equipped with or not ready for
relay function.
32 13 No confidential mail in the remote terminal.
32 14 The available memory space of the remote terminal is
less than that required for reception of the
confidential or relay broadcasting instruction.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not coincident.
40 13 Polled by any other manufacturers' terminal while
waiting for secure polling.
40 17 Invalid resolution selected.
40 20 Invalid full-color mode requested.
50 01 Vertical resolution capability changed after
compensation of background color.
63 01 Password plus "lower 4 digits of telephone number"
not coincident.
63 02 Password not coincident.
63 03 Polling ID not coincident.
74 DCN received.
80 01 Fallback impossible.
90 01 Unable to detect video signals or commands within 6
seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or block
count.
Cause
2-16
Refer to:
Chapter 2, Section
4.9.4
Confidential