Brother DCPJ525W Service Manual page 214

(4) Slightly lift up the front end of the lower cover, open the ink cartridge cover fully, warp the
cover arm downwards to release it from the slit in the lower cover, and then remove the
right and left bosses on the ink cartridge cover downwards from the lower cover.
(5) For disc printing models Push down the disc guide and pull it towards you.
(6) Release the latches on the media module cover from the lower cover and pull it out to the
front.
(7) Pull the lock arm of the media module cover outwards and remove the status lens.
Disc guide
Assembling Note: When mounting the ink cartridge cover, hold it in a fully opened position, fit
the right and left bosses into the sockets in the lower cover from bottom up, and insert the cover
arm into the slit while warping it down.
Socket
Latch
Media module cover
Status lens
3-77
Slit
Socket
Latch
Status
lens
Boss
Lock arm
Cover arm
Boss
Ink cartridge
cover
(3_073)
Confidential