Brother DCPJ525W Service Manual page 253

(3) If the photo tray base pads need to be replaced, squeeze the photo bypass tray release
button, push the photo bypass tray forward until it clicks into the photo printing position
shown below, and peel the base pads off the bottom of the photo bypass tray.
Note: Once removed, the photo tray base pads will become unusable and new pads will
have to be put back in.
Photo tray base pads
Paper tray
Depressed
Photo tray base pads
section
Assembling Notes:
• When attaching a new photo tray base pad to the photo bypass tray, align the front edge of
the pad with that of the depressed section on the tray and center the pad widthways as shown
above.
Photo bypass tray
(Photo paper tray)
Paper tray
Align the edge of each photo tray
base pad with the front edge of the
depressed section on the paper tray.
3-116
Photo bypass tray release button
Output paper tray cover
(3_108_E)
Confidential