Brother DCPJ525W Service Manual page 201

ADF motor
(25) Remove the screw (that secures the ADF motor together with the grounding wire), slightly
rotate the ADF motor counterclockwise to release it from the boss on the ADF drive unit,
and remove the ADF motor.
(26) Disconnect the ADF motor harness from the motor.
ADF motor harness
ADF motor harness
(Rear)
ADF motor
Viewed from the top
Assembling Note: Connect the ADF motor harness to the motor and route it through two cable
guides "x" as shown above. Secure the ADF motor together with the grounding wire to the ADF
drive unit with the screw.
Grounding wire
Boss
ADF motor
(Rear)
ADF drive unit
ADF harness ASSY
(Bundle of ADF motor harness and
its grounding wire, document detection
sensor harness, and document scanning
position sensor harness)
Cable guides "x"
Grounding wire
3-64
Screw, pan
ADF unit
(s/p washer)
M3x6
(Left)
(3_059)
Confidential