Disassembly Of Control Panel Assy - Brother DCPJ525W Service Manual

9.8

Disassembly of Control Panel ASSY

(The control panel ASSY contains the document scanner open actuator.)
(1) Turn the control panel ASSY upside down.
(2) Models with touch panel & 1.9-inch LCD Disconnect the LED harness from the panel
PCB.
(3) MFC Release the five latches (three "x" and two "y" latches).
DCP Release three latches "x."
Then remove the panel PCB ASSY.
(4) MFC Remove the two rubber keys.
DCP Remove the rubber key.
(5) Release latch "z" provided on the control panel base and remove the document scanner
open actuator together with its spring.
(6) MFC without touch panel Remove the LCD unit.
(7) DCP Remove the EX panel plate.
MFC with touch panel
Actuator spring
Latch "z"
Document
scanner open
actuator
Panel PCB ASSY
Rubber key R
Tab
Latch "z"
Latches "x"
*1 For models with touch panel
*2 For models with touch panel & 1.9-inch LCD
Panel harness
LED harness *
Touch panel
1
harness *
Tab
Control panel base (Bottom side)
Grounding wire *
3-70
Rubber key L
2
Tab
Latches "y"
Tab
LCD flat cable
1
(3_065_MFCJ825DW)
Confidential