Acquire White Level Data And Set Cis Scanner Area (Function Code 55); Set An Id Code (Change The Serial Number) And Update The Head Property Data - Brother DCPJ525W Service Manual

Hide thumbs Also See for DCPJ525W:
Table of Contents

Advertisement

If restoring machine information ends successfully in
operations given in
2.9

Acquire white level data and set CIS scanner area (Function code 55)

Refer to
Chapter 5, Section
2.10 Set an ID code (change the serial number) and update the head property
data
Note: Make sure that the Brother Maintenance USB Printer driver has been installed to your
PC. To do it, click Start | Settings | Printers to call up the Printers window and confirm that the
Brother Maintenance USB Printer icon (shown on the sample window on
displayed. If the driver has not been installed, install it.
(1) Make sure that your PC is turned off, then connect the machine to your PC using a USB
cable.
(2) Switch the PC on.
(3) On the PC, run the Service setting tool (BrUsbSn.exe) to display the following window.
(4) On the model menu, click Ink 10Model .
(5) In Port on the BrUsbSn screen, select the port number assigned to the Brother
Maintenance USB Printer. If the port number is unknown, follow the instructions given in
Section 1.1, step
Sections 2.9
to
2.13
and 2.17.
1.4.16.
(8).
Section
2.5, it is not necessary to perform
4-23
page
4-3) is
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents