Principles of operation
Screen display
Other displays
The measurement line below the screen display shows
values of settings, measured values, and status indica-
tions. As an alternative, a scale can be shown here,
giving an overview of the echo positions.
H Note:
Every measurement value can also be shown in an
enlarged display at the top right corner of the A-scan
(setting in the function group MEAS, function S-DISP).
Amplitude height
Amplitude height
Status indicator:
Gate A (%)
Gate B (%)
TOF = Flank
H Note:
You can configure the four positions of the measure-
ment line for set and measured values as required
(function group MSEL). Please refer to chapter 5.14,
Sound path
Sound path
section Configuring the measurement line on this sub-
Gate A
Gate B
ject.
Example of a measurement line
Krautkramer USM 35X
Issue 01, 04/2005
4-5