Table of Contents
Advertisement
Adding a RADIUS Group
NOTE:
Before configuring RADIUS groups, ensure that the RADIUS Filter-Id option is enabled for the
RADIUS Domain to which your group is associated. This option is configured in the Portals > Domains
page.
The RADIUS Groups tab allows the administrator to enable user access to the SMA/SRA appliance based on
existing RADIUS group memberships. By adding one or more RADIUS groups to a Secure Mobile Access group, only
users associated with specified RADIUS group(s) are allowed to login.
To add a RADIUS group:
1
In the Users > Local Groups page, click Configure for the RADIUS group you want to configure.
2
In the RADIUS Groups tab and click Add Group... The Add RADIUS Group page displays.
3
Enter the RADIUS Group name in the corresponding field. The group name must match the RADIUS
Filter-Id exactly.
4
Click Accept. The group displays in the RADIUS Groups section.
Adding an Active Directory Group
The AD Groups tab allows the administrator to enable user access to the SMA/SRA appliance based on existing
AD group memberships. By adding one or more AD groups to a Secure Mobile Access group, only users associated
with specified AD group(s) are allowed to login.
NOTE:
Before configuring and Active Directory group, ensure that you have already created an Active
Directory domain. This option is configured in the Portals > Domains page.
To add an AD group:
1
In the Users > Local Groups page, click Configure for the AD group you want to configure.
2
In the AD Groups tab and click Add Group... The Add Active Directory Group page displays.
3
Enter the Active Directory Group name in the corresponding field.
4
Optionally, select Associate with AD group if you wish to associate the Secure Mobile Access group with
your AD group. This step can also be completed at a later time in the Edit Group page under the AD
Groups tab.
5
Click Accept. The group displays in the Active Directory Groups section. The process of adding a group
can take several moments. Do not click Add more than one time during this process.
Creating a Citrix Bookmark for a Local Group
To configure a Citrix bookmark for a user:
1
Navigate to Users > Local Groups.
2
Click the configure icon next to the group you want to configure.
3
In the Edit Group Settings window, select the Bookmarks tab.
4
Click Add Bookmark...
5
Enter a name for the bookmark in the Bookmark Name field.
6
Enter the name or IP address of the bookmark in the Name or IP Address field.
7
From the Service drop-down list, select Citrix Portal (Citrix).
8
Select the Resource Window Size from the drop-down list.
9
Select an Access Type Selection. Smart or Manual.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
410
Advertisement
Chapters
Table of Contents
Troubleshooting
