Users > Local Users > Edit Epc Settings - Dell SMA 200 Administration Manual

OR
Add or remove profiles using the Edit EPC page:
a To add or remove an Allow profile for the group, click Add Allow Profiles.
b In the Edit EPC page, select the profiles from the All Profiles list that you want to add to the
group and click Add selected profiles. Selected profiles are then moved to the In Use Profiles
list on the page that lists all device profiles that are used for the group.
c To disable a profile without deleting it, clear Enabled next to the profile. To enable a profile,
select Enabled. This allows you to selectively enable or disable a profile that is used periodically.
d To remove an Allow profile from the group, select the profile from the In Use Profiles list and
click Remove selected profiles.
e To add or remove a Deny profile for the group, click Add Deny Profiles and follow the preceding
steps b and d.
8 Click Accept to save your changes.
Users > Local Users > Edit EPC Settings
After creating device profiles, assign them to the local users. Device profiles can be Allow profiles and Deny
profiles. Allow profiles identify attributes of the client's network that must be present before a user is
authenticated, and Deny profiles identify attributes of the network that cannot be present. If multiple profiles
are defined for a user, connection to the SMA/SRA appliance is granted only when a client's environment fulfills
all Allow profiles for the user and does not fulfill any Deny profiles. Use the EPC tab on the Users > Local Users
> Edit page to assign device profiles to a user.
NetExtender login can be disabled on platforms where EPC is enabled.
To configure device profiles to be used when authenticating a local user:
1 Navigate to the Users > Local Users page and click Edit for the user to be configured for EPC.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
253