Table of Contents
Advertisement
click Add to add Type and Address values for this network object. The Define Object Address page is
displayed.
NOTE:
Policies cannot be created for incomplete network objects.
Defining an Object Address
1
In the Define Object Address page, click on the Object Type drop-down list and select an object type.
The four object types are:
•
IP Address - A single IP address.
•
Network Address - A range of IP addresses, defined by a starting address and a subnet mask.
•
IPV6 Address - A single IPv6 address.
•
IPV6 Network - A range of IPv6 addresses.
2
Type in the appropriate information pertaining to the object type you have selected.
•
For the IP Address object type, type an IP address in the IP Address field.
•
For the IP Network object type, in the Network Address field, type an IP Address that resides in
the desired network subnet and type a subnet mask in the Subnet Mask field.In the Port
Range/Port Number field, optionally enter a port range in the format 80-443, or enter a single
port number.
•
For the IPV6 Address object type, type an IP address in the IPv6 Address field.
•
For the IPV6 Network object type, in the IPv6 Network Address field, type an IPv6 address that
resides in the desired network subnet and type the number of bits to use as a prefix in the Prefix
field.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
132
Advertisement
Chapters
Table of Contents
Troubleshooting
