Table of Contents
Advertisement
•
IP Address - If your policy applies to a specific host, enter the IP address of the local host
machine in the IP Address field. Optionally enter a port range (80-443) or a single port number
into the Port Range/Port Number field.
•
IP Address Range - If your policy applies to a range of addresses, enter the beginning IP address
in the IP Network Address field and the subnet mask that defines the IP address range in the
Subnet Mask field. Optionally enter a port range (4100-4200) or a single port number into the
Port Range/Port Number field.
•
Network Object - If your policy applies to a predefined network object, select the name of the
object from the Network Object drop-down list. A port or port range can be specified when
defining a Network Object. See
•
Server Path - If your policy applies to a server path, select one of the following radio buttons in
the Resource field:
•
Share (Server path) - When you select this option, type the path into the Server Path field.
•
Network (Domain list)
•
Servers (Computer list)
See
Editing a Policy for a File Share
•
URL Object - If your policy applies to a predefined URL object, type the URL into the URL field.
•
IPv6 Address - If your policy applies to a specific host, enter the IPv6 address of the local host
machine in the IPv6 Address field. Optionally enter a port range (for example, 4100-4200) or a
single port number into the Port Range/Port Number field.
•
IPv6 Address Range - If your policy applies to a range of addresses, enter the beginning IPv6
address in the IPv6 Network Address field and the prefix that defines the IPv6 address range in
the IPv6 Prefix field. Optionally enter a port range (for example, 4100-4200) or a single port
number into the Port Range/Port Number field.
•
All IPv6 Address - If your policy applies to all IPv6 addresses, you do not need to enter any IP
address information.
7
Select the service type in the Service menu. If you are applying a policy to a network object, the service
type is defined in the network object.
8
Select Allow or Deny from the Status drop-down list to either permit or deny SMA/SRA connections for
the specified service and host machine.
9
Click Accept to update the configuration. After the configuration has been updated, the new group
policy is displayed in the Edit Local Group window. The group policies are displayed in the Group
Policies list in the order of priority, from the highest priority policy to the lowest priority policy.
Editing a Policy for a File Share
To edit file share access policies:
1
Navigate to Users > Local Groups.
2
Click the configure icon next to the group you want to configure.
3
Select the Policies tab.
4
Click Add Policy...
Adding Network Objects
on page 391.
Dell SonicWALL Secure Mobile Access 8.5
on page 130.
Administration Guide
391
Advertisement
Chapters
Table of Contents
Troubleshooting
