Configuring SNMP Settings
To configure the SNMP Settings fields:
1
Navigate to System > Administration.
2
Select Enable SNMP.
3
Type the name (FQDN) of the system into the System Name field.
4
Type the email address of the system contact into the System Contact field.
5
Type the city or other identifying location of the system into the System Location field.
6
Type the asset number of the system into the Asset field. The asset number is defined by the
administrator.
7
Type the public community name into the Get Community Name field. This name is used in SNMP GET
requests.
8
Click Accept to save your changes.
Enabling GMS Management
The Dell SonicWALL Global Management System (GMS) is a web-based application that can configure and
manage thousands of Dell SonicWALL Internet Security appliances, including global administration of multiple
site-to-site VPNs from a central location.
Complete the following steps to enable GMS management of your SMA/SRA appliance:
1
Navigate to System > Administration.
2
Select Enable GMS Management.
3
Type the host name or IP address of your GMS server in the GMS Host Name or IP Address field.
4
Type the port number of your GMS server in the GMS Syslog Server Port field. The default for
communication with a GMS server is port 514.
5
Type the desired interval for sending heartbeats to the GMS server in the Heartbeat Interval (seconds)
field. The maximum heartbeat interval is 86400 seconds (24 hours).
6
Click Accept to save your changes.
External FTP/TFTP Server
The External FTP/TFTP Server section allows you to configure an external FTP server to backup your settings
and diagnostic data.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
109