Dell SMA 200 Administration Manual page 370

• Smart: Allows the firmware to decide which mode to launch on the client.
When creating a new unified bookmark, Smart is selected by default. Auto-detection is processed
using bookmark-specific default modes while launching the bookmark.
• Manual: Provides options to configure the modes, their priorities, and the choose method. At
least one mode should be enabled in the selection box.
The launch sequence is as follows: HTML5 and Java. Selecting Manual allows you to change,
enable, or disable the launch methods. If you select Native to launch the SSHv2 bookmark, then
the SMA Connect Agent launches the SSHv2 Receiver on the local machine to do the SSHv2
connection.
The up and down arrows are used to adjust the launch priority. Fork and tick are used to disable
or enable the modes. Disabled modes are put at the bottom of the list with a gray font color.
The Choose during Launch option is not enabled by default under the Manual mode. In this
setting, while launching the bookmark, the first available mode in the configured list is run at
once after auto-detection.
After the Choose during Launch option is enabled, while launching the unified bookmark, if
there are multiple modes available for the client, a menu is provided from which you can choose
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
370