Configuring The Outlook Anywhere Portal - Dell SMA 200 Administration Manual

Configuring the Outlook Anywhere Portal

To configure the Outlook Anywhere Application Offloading portal:
1 Enable Outlook Anywhere on the Exchange Server. Verify that it is properly configured.
2 Create an Application Offloading portal based on the following settings:
Because Autodiscover uses a different URL for fetching configuration, set the Autodiscover URL as the
Virtual Host Alias name. Verify that the Autodiscover URL is aligned with the Exchange Server settings.
3 Specify the Virtual Host Certificate. A wildcard certificate is preferred if Autodiscover is enabled.
4 Navigate to the Offloading tab.
5 Select Enable Email Clients Authentication.
6 Select the Default Domain Name from the drop-down list. This domain name is used as the default
domain for Secure Mobile Access authentication if the domain name is not specified in Outlook.
7 Open Microsoft Outlook.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
167