Dell SMA 200 Administration Manual page 363

The Choose during Launch option is not enabled by default under the Manual mode. In this
setting, while launching the bookmark, the first available mode in the configured list is run at
once after auto-detection.
After the Choose during Launch option is enabled, while launching the unified bookmark, if
there are multiple modes available for the client, a menu is provided from which you can choose
within a five second count-down. When only one mode is available, the bookmark is also run
immediately.
If the Remember my choice option is selected during the launch time, the selected mode is
remembered through a cookie.
That means, when next launching the bookmark, the remembered mode is run directly within two
seconds. Clicking anywhere in the HTML can 'forget' the remembered mode so you can re-choose.
Editing or deleting the bookmark in the same browser can also reset the remembered mode.
When no modes are able to run on the client with the configuration, the following notice appears.
• In the Encoding drop-down list, select one of:
• Raw – Pixel data is sent in left-to-right scanline order, and only rectangles with changes
are sent after the original full screen has been transmitted.
• RRE – Rise-and-Run-length-Encoding uses a sequence of identical pixels that are
compressed to a single value and repeat count. This is an efficient encoding for large
blocks of constant color.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
363