Adding Members; Deleting A Group - Dell SMA 200 Administration Manual

Adding members

NOTE: You must create a URL Based Aliasing group before you can begin adding members to the group.
URL Based Aliasing allows you to add up to 100 members to a group.
To add members to a URL Based Aliasing group:
1 Navigate to the Portals > URL Based Aliasing page.
2 Click the Configure icon of the group you want to modify. The Group URL Based Aliasing Settings page
displays.
3 Click Add Member. The Add URL Based Aliasing Member page displays.
Configure the following fields:
• URL — Enter the URL or name of the member.
• Comments — Enter any additional information. Anything entered in this field displays on the
Index page.
• Scheme — Select from the drop-down list the scheme of the backend server. Select between
HTTP, HTTPS, or AUTO.
• Application Server Host — Enter a Hostname, IPv4 address, or IPv6 address of the host.
• Port — Specify the port number. The default value is 443.
4 Click Accept to save changes and add a member to the group. The newly added member appears on the
URL Based Aliasing Settings page.
Repeat steps 2 through 4 for each member you wish to add to the group.

Deleting a group

To delete a specific group:
1 Navigate to the Portal > URL Based Aliasing page.
2 Click the Delete icon of the group you wish to delete.
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
200