Table of Contents
Advertisement
Modifying User NetExtender Settings
This feature is for external users, who inherits the settings from their assigned group upon login. NetExtender
client settings can be specified for the user, or use the group settings. For information about configuring group
settings, see
Editing Group Settings
To enable NetExtender ranges and configure Static client settings for a user:
1
Navigate to Users > Local Users.
2
Click the configure icon next to the user you want to configure.
3
In the Edit Local User page, select the NxSettings tab.
a
Under NetExtender Client Address Range, select Use Static Pool from the drop-down list.
b Supply a beginning client IPv4 address in the Client Address Range Begin field.
c
Supply an ending client IPv4 address in the Client Address Range End field.
d Under NetExtender Client IPv6 Address Range, optionally select Use Static Pool from the
drop-down list.
e
Supply a beginning client IPv6 address in the Client Address Range Begin field.
f
If using IPv6, supply an ending client IPv6 address in the Client Address Range End field.
4
Under NetExtender Client Settings:
Select one of the following from the Exit Client After Disconnect drop-down list:
•
Use group setting - Take the action specified by the group setting. See
page 384.
•
Enabled - Enable this action for the user. Overrides the group setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
5
In the Uninstall Client After Exit drop-down list, select one of the following:
•
Use group setting - Take the action specified by the group setting. See
page 384.
•
Enabled - Enable this action for the user. Overrides the group setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
6
In the Create Client Connection Profile drop-down list, select one of the following:
•
Use group setting - Take the action specified by the group setting. See
page 384.
•
Enabled - Enable this action for the user. Overrides the group setting.
•
Disabled - Disable this action for all members of the group. Overrides the global setting.
7
In the User Name & Password Caching drop-down list, select one of the following:
on page 384.
Editing Group Settings
Editing Group Settings
Editing Group Settings
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
on
on
on
347
Advertisement
Chapters
Table of Contents
Troubleshooting
