Dell SMA 200 Administration Manual page 247

2 Click on the configure icon
launched.
3 Click on the Nx Settings tab.
See also:
• Configuring Group Client IP Address Range
• Configuring Group DNS Settings
• Configuring Group NetExtender Settings
• Configuring Group NetExtender Routes
Configuring Group Client IP Address Range
To configure group-level NetExtender address ranges:
1 To configure an IPv4 address range for this group, enter the beginning of the range in the Client Address
Range Begin field and the end of the range in the Client Address Range End field.
2 To configure an IPv6 address range for this group, enter the beginning of the range in the Client IPv6
Address Range Begin field and the end of the range in the Client IPv6 Address Range End field. IPv6
configuration is optional.
3 Click Accept.
Configuring Group DNS Settings
To configure custom NetExtender DNS settings for a group:
1 In the Primary DNS Server field, type in the IP address of the main DNS server.
2 In the Secondary DNS Server field, optionally type the IP address of the backup DNS server.
3 In the DNS Domain field, type the domain for the DNS servers.
4 Click Accept.
Configuring Group NetExtender Settings
The following NetExtender settings can be configured for the group:
• Exit Client After Disconnect - The NetExtender client exit when it becomes disconnected from the
SMA/SRA server. To reconnect, users in the group should either return to the Secure Mobile Access portal
and click NetExtender or launch NetExtender from their Programs menu.
• Uninstall Client After Exit - The NetExtender client automatically uninstalls when it terminates or
when the user selects Exit (as opposed to simply disconnecting). To reconnect, users in the group should
return to the Secure Mobile Access portal and click NetExtender. This option only applies to Windows
clients. It does not apply to Android, Mac, or Linux clients.
• Create Client Connection Profile - The NetExtender client creates a connection profile recording the
SMA/SRA server name, the domain name and optionally the username and password.
• The User Name & Password Caching options provide flexibility in allowing users to cache their
usernames and passwords in the NetExtender client. The three options are Allow saving of user name
only, Allow saving of user name & password, and Prohibit saving of user name & password. These
options enable administrators to balance security needs against ease of use for users.
• In the Allow client to use Touch ID on IOS devices, the control only blocks future attempts to log in with
fingerprint technology on IOS devices when the option is disabled as there is no method for the server to
change the client settings until the client attempts a connection. So in some cases, a client might not be
for the group you want to edit. The Edit Group Settings window is
on page 247
on page 247
on page 247
on page 248
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
247