Dell SMA 200 Administration Manual page 252

NetExtender login can be disabled on platforms where EPC is enabled.
EPC portal checking uses the NetExtender browser plug-in. EPC is checked when users log in to the web portal
from a web browser that blocks any access to the private network from untrusted sites.
To configure device profiles to be used when authenticating users in a local group:
1 Navigate to the Users > Local Groups page and click
configured for EPC.
2 When the Edit Local Group page appears, click the EPC tab. Use the EPC tab to enable or disable EPC for
the group, select how to handle authentication requests from unsupported clients, and to add or remove
device profiles.
3 In the Enable EPC field, select Enabled to enable EPC for the group, Disabled to disable EPC for the
group, or Use global setting to either enable or disable EPC based on whether EPC is enabled on the
Users > Local Users > Edit Global Policies or Users > Local Groups > Edit Global Policies page.
4 In the Enable Portal Login field, set the default action to Enabled to allow or Disabled to block logins
from these portals when EPC is enabled.
5 EPC is supported for iOS and Android mobile clients. In the Enable Mobile Client Login field, set the
default action to Enabled to allow or Disabled to block logins from these clients when EPC is enabled.
6 Fields in the Recurring EPC section vary, depending on whether you are configuring EPC for the Global
group or a local group. To configure EPC for the Global group, select Check endpoint at login to do EPC
checks only when users login, or select Check endpoint at login and every x minutes thereafter to
also do EPC checks at set intervals. For example, to do EPC checks whenever a user logs in and every x
minutes thereafter while the user is logged in, select Check endpoint at login and every x minutes
thereafter and type the number of minutes to wait between EPC checks.
OR
To configure EPC for a local group, select Use global setting or Custom Setting from the Recurring
EPC drop-down list. If you select Use global setting, the local group inherits the EPC settings from the
Global group. If you select Custom Setting, the Check endpoint at login and Check endpoint at login
and every x minutes thereafter prompts are displayed and you can configure EPC, as explained for the
Global group.
7 Either select Inherit global device profiles to use all defined Allow and Deny device profiles for the
group.
Edit for the Global group or a local group to be
Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
252