Resetting And Setting The Switching Statistics - Siemens siprotec 7SA6 User Manual

Control During Operation
7.1.2.2

Resetting and Setting the Switching Statistics

From the
Device Front
:
From PC with
®
DIGSI 4
7-14
Figure 7-16 List of statistic values in DIGSI
The memories and counters for switching statistics are secured against a loss of
power supply voltage. The values can, however, be set to zero, or to any desired value
within certain setting limits.
In the 67$7,67,& (see previous sub-section) sub-menu (see previous sub-section),
select the value to be set by using the
7-17 for an example of changing the trip counter. Enter the password (password N° 5
for individual settings). Having done this the cursor blinks and the value is highlighted
in a box. The number can be overwritten using the number keys. If the new value is
outside of the permissible range, either above or below, then the maximum or mini-
mum limit value appears at the bottom edge of the screen. Confirm the change with
the key.
ENTER
67$7,67,&6

,/
∑
7ULS &RXQW
Figure 7-17 Setting statistics values from the device front — example
In the 6WDWLVWLF window (see previous sub-section), mark the value that is to be set.
With the right mouse button, open a context menu and select 6HW. See Figure 7-18.
After the password N° 5 for individual settings is entered, the previous value in the
window can be overwritten.
®
4 — example
key, and then press the

N$
!
ENTER ENTER
key. See Figure
ENTER
7ULS &RXQW 2SHU +UV  
0D[
2147483648
C53000-G1176-C133-1
7SA6 Manual