Siemens siprotec 7SA6 User Manual page 686

Appendix
Interface Cable
Operating Software
®
DIGSI 4
Graphical Analysis
Program DIGRA
Display Editor
Graphic Tools
DIGSI REMOTE 4
SIMATIC CFC 4
A-10
An interface cable is necessary for communication between the SIPROTEC device
and a PC. Requirements for the computer are Windows 95 or Windows NT4 and the
operating software DIGSI
Interface Cable between PC or SIPROTEC device
Cable with 9-pin male/female connections
Software for setting and operating SIPROTEC
Operating Software DIGSI
®
DIGSI 4, basic version with license for 10
computers
®
DIGSI 4, complete version with all option packages
Software for graphical visualization, analysis and evaluation of fault data. Option pack-
age of the complete version of DIGSI
Graphical Analysis Program DIGRA
Full version with license for 10 machines
Software for creating basic and power system control pictures. Option package
of the complete version of DIGSI
Display Editor 4
Full version with license for 10 machines
Graphical Software to aid in the setting of characteristic curves and provide zone dia-
grams for overcurrent and distance protective devices. Option package of the com-
®
plete version of DIGSI
Graphic Tools 4
Full version with license for 10 machines
Software for remote operating protective devices via a modem (and possibly a star
connector) using DIGSI
DIGSI REMOTE 4
Full version with license for 10 machines
Software for graphical setting interlocking (latching) control conditions and creating
additional function is SIPROTEC 4 devices. Option package for the complete version
®
of DIGSI 4.
SIMATIC CFC 4
Full version with license for 10 machines
®
4
®
®
4
®
4
®
®
4
.
4
®
4. (Option package of the complete version of DIGSI
Order No.
7XV5100-4
4 devices
Order No.
7XS5400-0AA00
7XS5402-0AA0
Order No.
7XS5410-0AA0
Order No.
7XS5420-0AA0
Order No.
7XS5430-0AA0
Order No.
7XS5440-1AA0
Order No.
7XS5450-0AA0
C53000-G1176-C133-1
®
4.
7SA6 Manual