Basic Network Settings - Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

User Guide for the T48G Skype for Business phone
The phone status is displayed on the first page of the web user interface.

Basic Network Settings

If your phone cannot contact a DHCP server for any reason, you need to configure network
settings manually. The Skype for Business phone can support either or both IPv4 and IPv6
addresses.
To configure the IP mode via phone user interface:
Tap ->Advanced (default password: admin) ->Network->WAN Port.
1.
Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) from the pull-down list of IP Mode.
2.
Tap to accept the change or tap
3.
You can configure a static IPv4 address for the Skype for Business phone. Before configuring it,
make sure that the IP mode is configured as IPv4 or IPv4 & IPv6.
44
to cancel.