Phone Initialization; Sign-In - Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

Phone Initialization

After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The touch screen
displays "Welcome Initializing...Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4 network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by default.
After the phone finishes the initialization, the sign-in screen appears on the touch screen.
Note
If your network does not use DHCP, proceed to

Sign-in

After the initialization, the sign-in screen appears. The screen will be shown as below:
Basic Network Settings on page 44.
Getting Started
17