Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual page 247

Parameter
Exchange Log
Level
To configure the level of the system log via web user interface:
Click on Settings->Configuration.
1.
Select the desired level from the pull-down list of corresponding log levels.
2.
Enter the desired maximum size of global log in the Max Log File Size(1-3072KB) field.
3.
Click Confirm to accept the change.
4.
Note
The severity level of the exported Module Log Level should not be greater than the Global Log
Level. For example, if you set Global Log Level to 3 and Module Log Level to 6, the exported
log level will be 3.
High level may make some sensitive information accessible (e.g., password and dial number), we
recommend that you reset the log level to 3 after providing the syslog file.
To reset severity level of all logs via web user interface:
Click on Settings->Configuration.
1.
Description
BToE logs to be reported to a log
file.
Default: 3
Configure the severity level of the
Exchange logs to be reported to a
log file.
Default: 3
Troubleshooting
Configuration Method
Web User Interface
233