Troubleshooting; Troubleshooting Solutions - Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

Troubleshooting

This chapter provides general troubleshooting information to help you solve the problems you
might encounter when using your T48G Skype for Business phone.
If you require additional information or assistance with your new phone, contact your system
administrator.

Troubleshooting Solutions

Why is the touch screen blank?
Ensure that the phone is properly plugged into a functional AC outlet.

Ensure that the phone is plugged into a socket controlled by a switch that is on.

If the phone is plugged into a power strip, try to plug it directly into a wall outlet instead.

If the phone is powered from PoE, ensure you use a PoE-compliant switch or hub.

Why does the phone display "Network Unavailable"?
Ensure that the Ethernet cable is plugged into the Internet port on the phone and the

Ethernet cable is not loose.
Ensure that the switch or hub in your network is operational.

Contact your system administrator for more information.

Why doesn't the phone display time and date correctly?
Check if you have configured the phone to obtain the time and date from the SNTP server
automatically. If the phone fails to connect the SNTP server, contact your system administrator
for more information. You can also configure the time and date manually. For more information,
refer to Time & Date
How can I find the basic information of the Skype for Business phone?
Press the key when the phone is idle to check the basic information of the Skype for
Business phone, such as IP address and firmware version. For more basic information, refer to
Phone Status on page 42.
How to obtain the MAC address of a phone when the phone is not powered on?
Three ways to obtain the MAC address of a phone:
You can ask your supplier for shipping information sheet which includes MAC addresses

according to the corresponding PO (Purchase Order).
on page 52.
Troubleshooting
225