Basic Network Settings - Yealink T46G Skype For Business Edition User Manual

User Guide for the T46G Skype for Business phone
The phone status is displayed on the first page of the web user interface.

Basic Network Settings

If your phone cannot contact a DHCP server for any reason, you need to configure network
settings manually. The Skype for Business phone supports three IP modes: IPv4, IPv6 and
IPv4&IPv6.
To configure the IP mode via phone user interface:
Press
1.
Press
2.
Mode field.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
You can configure a static IPv4 address for the Skype for Business phone, make sure that the IP
mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
Press
1.
Press
2.
36
->Advanced (default password: admin) ->Network->WAN Port.
or , or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IP
->Advanced (default password: admin) ->Network->WAN Port->IPv4.
or , or the Switch soft key to select the Static IP from the Type field.