Led Instructions; User Interfaces; Phone User Interface - Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

User Guide for the T48G Skype for Business phone
Icons

LED Instructions

Power Indicator LED
LED Status
Solid red
Fast flashing red
Slow flashing red
Off
Note The above introduces the default power indicator LED status. The status of the power indicator
LED is configurable via web user interface. For more information, refer to
Yealink_Skype_for_Business_HD_IP_Phones_Administrator_Guide

User Interfaces

Two ways to customize configurations of your T48G Skype for Business phone:
The user interface on the Skype for Business phone.

The user interface in a web browser on your PC.

The hardware components keypad and touch screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.

Phone User Interface

You can customize your phone by tapping
Advanced option is only accessible to the administrator, and the default administrator
6
Description
Off Line
Unknown
The phone is initializing.
The phone is ringing.
The phone receives a voice mail.
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.
to access the phone user interface. The
Description
.