User Guide for the T48G Skype for Business phone
PPP negotiation to obtain the IP address. Contact your system administrator for the PPPoE user
name and password.
To configure PPPoE via phone user interface:
Tap
->Advanced (default password: admin) ->Network->WAN Port->IPv4.
1.
Tap PPPoE from the pull-down list of Type.
2.
Enter the PPPoE user name and password in the corresponding fields.
3.
Tap
to accept the change or tap
4.
Note
Wrong network settings may result in inaccessibility of your phone and may also have an impact
on your network performance. For more information on these parameters, contact your system
administrator.
46
to cancel.