Table 2-12 Rj-45 Jack – Isdn Standard Interface Modular Connector Pinout (Tbsu-Te Mode) - Toshiba Strata DK40 Installation & Maintenance Manual

DK40 Installation
Table 2-12 RJ-45 Jack – ISDN Standard Interface Modular Connector Pinout (TBSU-TE
mode)
Pin
1 Green
2 Green/White
3 Orange/White
4 Blue/White
5 Blue
6 Orange
7 Brown
8 Brown/White
Notes
TBSU EMC Ferrite Core Requirement
To ensure that the TBSU circuits meet the EMC requirements, it is necessary to run all wire
connecting TBSU circuits (TE mode and NT mode) through a Ferrite core. Use Toshiba part
number, 093-1050/02, which is shipped with the TBSU.
wiring through the Ferrite core.
2-42
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Color Name
T2
R2
R3
R1
T1
T3
T4
R4
Pins are numbered left to right when looking into the jack cavity with the locking tab
down.
TBSU Two-circuit ISDN BRI Interface Unit
Power 3 (not used on DK TBSU)
Power 3 (not used on DK TBSU)
Transmit to Network (NT-1, S/T jack)
Receive From Network (NT-1, S/T jack)
Receive From Network (NT-1, S/T jack)
Transmit to Network (NT-1, S/T jack))
- Power 2 (not used on DK TBSU)
+ Power 2 (not used on DK TBSU)
Figure 2-22
Strata DK40 I&M Manual Spring 1999
Function
shows how to dress the