Voice Mail System Installation; Pc/Data Communications Interface Units; Dk40 Alarm Sensor - Toshiba Strata DK40 Installation & Maintenance Manual

PC/Data Communications Interface Units

Voice Mail System Installation

1. Ensure that the KSTU3, RSTU or PSTU PCB is installed in the system per
DK40 Universal Slot
2. Connect the VM system to the selected KSTU3, RSTU or PSTU standard telephone
port. (Refer to
Installation)
3. Program the Strata DK40 system for the required VM features. (Refer to
Stratagy or Stratagy DK Voice Messaging Systems" on Page
"General Voice Mail (Standard Telephone Port) Programming" on Page
4. For DK40 ensure that a K5RCU is installed on the KSU and verify that the code 98 is
assigned for the Slot 00.
5. Perform additional VM system programming as applicable (refer to customer-supplied
installation/programming manuals).
PC/Data Communications Interface Units
The Strata DK40 supports one type of Data Interface Unit (RPCI-DI).
The RPCI-DI unit becomes part of the digital telephone, replacing the telephone's base. Each
RPCI or PDIU is powered by the digital port to which it is connected.
The RPCI-DI can operate in the 'Telephony Application Program Interface Mode' (TAPI).
The RCPI operating mode is controlled by the PC connected to the RPCI-DI. Refer to the
PCIU Installation & Programming Guide and
Data Interface Unit (RPCI-DI) Installation for further details.
Notes
"Digital Ports" include the PDKU digital station ports.
The RPCI-DI is not supported on the DKT 2001-F Hand Set.

DK40 Alarm Sensor

The PIOU or PIOUS PCB provides a circuit that can be set to detect a relay open or closed
condition from a facility alarm system. When the sensor is activated, all electronic and digital
telephones sound an alarm signal. The electronic/digital telephone alarm signal can be reset
by any electronic or digital telephone with an $ODUP 5HVHW button (see Program 39 in the
Strata DK40 Programming Manual).
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
PCBs.
Chapter 4 – DK40 Universal Slot PCB Wiring or
6-45, paragraph 3 and
Chapter 5 – Station Apparatus, Integrated
Peripheral Installation
Chapter 3 –
Chapter 2 – DK40
"Toshiba
6-47.)
6-49