Programming Feature Buttons; User Programming Mode; Programmable Feature Button Codes - Toshiba DP5000 Series User Manual

User Programming

Programming Feature Buttons

Programming Feature Buttons
You can use the User Programming Mode (described below) for customizing your
DP5000-series display telephone without the aid of an Administrator or Service
Technician. The User Programming mode is accessed with a
assigned to a Programmable Feature Button or through an access code. User
Programming enables users to customize these features:
• Programmable Feature Buttons – The DP5000-series telephones have 10 or 20
Programmable Feature Buttons to which the user can assign any one of
approximately 50 different features. Once a Programmable Feature Button is
programmed, press the button anytime you need to use the feature.
Note Directory number and external line buttons cannot be added or deleted, but their
ring tones can be individually changed. See

User Programming Mode

To enter User Programming Mode, press the
...or dial
LED is steady green.
To exit User Program Mode Lift the handset off-hook / on-hook.

Programmable Feature Button Codes

Programmable Feature Buttons are the unassigned buttons on your keystrip that can
be used to store features. The number of available Programmable Feature Buttons
depends on your telephone model and how the buttons are preassigned by the System
Administrator.
The following steps enable you to program features onto Programmable Feature
Buttons.
84
#9876
. "USER PROG MODE" appears on your LCD. The Program
Program
"Ring Tones" on page
Program
button
Strata CIX DP5000-series Telephone UG
button
15.
11/07