Figure 8-19 Tapi Test Screen - Toshiba Strata DK40 Installation & Maintenance Manual

TeleMagic Link
Search String - This should be set to whatever string should be searched for using the
above two parameters. For Screen Pop this is typically the Calling Phone number
which would be the token &P.
Testing TSPI Link
The TAPI dialogue box (Figure 19) provides a method for verifying the TAPI Driver is set-up
and operational. To check the driver, select an appearance (e.g. Intercom) and click on each
of the Pickup, Dial and Hang-up keys individually. To complete the test, you should repeat
this procedure for each line appearance.
To access the set-up screen for the Toshiba TAPI Service Provider, click on the Driver Set-up
button. The Configure Keys section of the screen should be programmed properly as they
will be interrogated and used as the Appearances by StrataLink. Whenever you make
configuration changes to the TAPI Service Provider, it is recommended that you exit and
restart StrataLink.

Figure 8-19 TAPI Test Screen

Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Computer Telephony Integration
Status light;
Red - Not Active/TSPI missing.
Yellow - Resetting.
Green - Active and working.
8-39