Pacu Programming - Toshiba Strata DK40 Installation & Maintenance Manual

DK40 Universal Slot PCBs

PACU Programming

Program 03:
Program 10-1: Enables/disables two-line conference.
Program 10-5: Assigns privacy on the tie line transferred calls.
Program 12:
Program 15:
Program16:
Program 17:
Program 30:
Program 39:
Program 40:
Program 41:
Program *43: Assigns outgoing digit translation.
Program *44: Assigns incoming digit translation.
Programs 50~56: Assigns LCR, if using the network as a route operation.
Program 93:
3-20
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Specify code 14 for slots that support PACUs and make sure the K5RCU is
enabled for DTMF operation.
Assigns various timing operations to the PACU.
Assigns tandem connection, exchange line signalling and recall.
Assigns the tie lines to line groups.
Assigns immediate or wink start, camp on over tie lines, paging over tie lines.
Note Also used to turn on the tie line dial tone return.
Disables K5RCU for dial pulse operation.
Assigns line access buttons to digital and electronic telephones.
Assigns station access to tie lines (incoming & outgoing).
Assigns station access to the lines (outgoing).
Assigns a name to a tie line
PACU AC15 Tie Line Unit
Strata DK40 I&M Manual Spring 1999