Functional Overview Of The Preamp; Front Panel - Burmester 077 Owner's Manual

(1) Input selector
(2) PHASE LED lights up when phase is180˚
between active input and output
(3) AUDIO LED shows up sampling of 192kHz, if
a D/A converter module is equipped
(4) Alphanumeric display shows the selected
input and the volume
(5) REC/MAIN LED lights up when REC is selected
(6) Volume selector controls the playback volume
(7) POWER LED lights up red when the unit is on

FUNCTIONAL OVERVIEW OF THE PREAMP

FRONT PANEL

(8) POWER switch to switch the unit on & off
(9) Base plate
(10) Foot – constructed as spike
(11) PHASE/DISPLAY switch key switches the phase
and toggles display brightness
(12) MODULE FUNCTION switch key functions
depend on installed module
(13) IR receiver for commands of remote control
(14) RECORD/PHONES switch key
(15) SETUP switch key to enter or leave
GLOBAL, RECORD and MAIN SETUP
3