Burmester 077 Owner's Manual page 23

Input names Through factory settings all inputs of the preamp 077 are assigned with specific names
(INPUT1 = CD etc.). You may, however label every input with another name of your choice.
We provide a range of names. It is of course possible to select an individual name, e.g. the
type of your device. Please refer to the menu item input selection in the chapter remote
control.
Select the menu item INPUT NAMES with the navigation buttons
If the menu item is selected, you will reach the input selection by pressing the OK button on
your remote control.
With the navigation buttons
With the navigation buttons
DVD, SAT, DVB, DAB, VHS, TV, CD, TUNER, PHONO, AUX 1, AUX 2, AUX 3, PC and I-
POD.
The item USER allows an individual name of your choice. By pushing the OK button when
USER is selected you will reach the name programming level.
A blinking digit indicates which part of the name can be modified. By using the navigation
buttons
buttons
underscore). By pressing the OK button you finish the input of signs. The display will show
SAVE:YES OK?
Now select YES/NO with the navigation buttons
button on your remote control. If YES is selected, the adjustment is accepted, if NO is
selected, the old setting is maintained.
In order to return to the menu item level, you have to select the item BACK with the
navigation buttons
INPUT NAMES if the action is completed.
Displaying serial It is possible to choose whether the device is supposed to show the serial number (ON)
number after switching on the device or not (OFF).
Select menu item SNR with the left rotary switch or the navigation buttons
remote control.
With the right rotary switch or the navigation buttons
select one of the following:
OFF
ON
¡ you may select the desired input.
you may select the desired name. Fixed Input names are
¡
you may select the position you would like to modify. With the navigation
¡
you may select the desired sign (letter A-Z, digit 0-9, blank space, hyphen or
¡
. Now confirm by pressing the OK button. The display indicates
¡
serial number not displayed
serial number displayed after switching on the device
19
¡ .
¡ and confirm by pressing the OK
¡ on your remote control you may
¡ on your