The Global Setup - Burmester 077 Owner's Manual

The GLOBAL SETUP offers the adjustment of global functions like INPUT LEVEL, INPUT NAMES, displaying the
SERIAL NUMBER, 4 CHANNEL MODE, SWITCHING OFF CONTROL ELEMENTS on the front panel, RC INPUT
and resetting to FACTORY SETTINGS.
The following chart provides an overview of all menu items, which can be adjusted in the GLOBAL SETUP. The
factory settings (defaults) are listed in brackets. Subsequent to the chart you will find a detailed description of the
menu items.
MENU ITEM
Input level
Input names
Displaying serial number
4 Channel Mode
on/off of control elements
on front panel
RC Input selection
Factory settings
The GLOBAL SETUP MENU is activated by pushing down the switch key (15) on your device or by longer pushing
the MENU button (approx. 2 sec) on your remote control. The display indicates the activation by shortly showing
GLOBAL SETUP, followed by the first menu item.
To exit and automatically save the menu push down the switch (15) or press the MENU button on your remote
control.
Input level By adjusting the input level, you can equalize jumps in the volume resulting from differing
output levels of the reproducers when switching between input sources.
Select the menu item INPUT LEVEL either with the left rotary switch or with the navigation
buttons
If the menu item is selected, you will reach the input selection by using the right rotary
switch or the OK button on your remote control.
With the left rotary switch or the navigation buttons
now select the desired input.
With the right rotary switch or the navigation buttons
now select the desired increase or decrease. The range of selection reaches from +12 dB
to -06 dB in single steps.
In order to return to the menu item level, you have to select the item BACK either with the
left rotary switch or the navigation buttons
the right rotary switch or by pressing the OK button on your remote control. The display
indicates INPUT LEVEL if the action is completed.

THE GLOBAL SETUP

DESCRIPTION
Pre-level adjustment for every input
Individual input names
Displaying serial number after switching on the unit
Select both levels, MAIN and RECORD as one preamp
Activating/Deactivating control elements on the front
panel
Activating/Deactivating Station +/- keys of the remote
control
Loading all factory settings
¡ on your remote control.
INPUT LEVEL
INPUT NAMES
¡
¡
on your remote control. Now confirm with
¡
18
DISPLAY VALUE
-06 to -01, (00), +01
to +12
Input name
SNR (OFF) / ON
4CH-MODE (OFF) / ON
FRONT-P OFF / (ON)
RC INPUT (NO) / YES
DEFAULTS
on your remote control you may
on your remote control you may