Table of Contents
Advertisement
(1) IR receiver
(2) Stand-by LED shows stand-by mode
(3) Display
(4) TONE LED illuminates when tone control is activated
(5) INPUT button for SURROUND input
(6) MONITOR button for tape monitoring
(12) SURROUND input balanced
(13) PREAMP output balanced
(14) PREAMP output unbalanced
(15) TAPE output unbalanced,
for analog recording device
(16) TAPE input unbalanced
(17) AUX2 input unbalanced
(18) AUX1 input balanced
(19) TUNER input balanced
(20) CD input balanced
FUNCTIONAL OVERVIEW
FRONT PANEL
(7) INPUT selector buttons
(8) VOLUME knob
(9) POWER button for turning the unit on or off
(10) TONE button for activating/deactivating the
(11) SETUP button for configuring the 032
REAR PANEL
(21) Loudspeaker terminal right, positive
(22) Loudspeaker terminal right, negative
(23) AC mains switch
(24) AC mains terminal
(25) REMOTE output
(26) BURLINK interface RS-232 with check LEDs
(27) REMOTE input
(28) Headphones jack
(29) BURLINK interface USB with check LEDs
(30) Loudspeaker terminal left, negative
(31) Loudspeaker terminal left, positive
2
tone control or the tone control setup
Advertisement
Table of Contents
