Serial Number; Switching Off Control Elements Of Device; Initial Volume - Burmester 077 Owner's Manual

Serial number

In order to view the serial number of your preamp 077 after switching on the device, the
function needs to be activated.
You will find the activation options in the GLOBAL SETUP in submenu SNR.
For specific instructions please refer to THE SETUP MENUS/ GLOBAL SETUP.
Switching off control In order to prevent undesired control of the preamp 077, it is possible to lock all controlling
elements of device elements on the front panel (except the POWER switch). Then all functions are only
operable via remote control. This provides a child proof lock option.
This option can be found in the GLOBAL SETUP in submenu FRONT-P.
For specific instructions please refer to the SETUP MENUS/ GLOBAL SETUP.

Initial volume

After switching on your preamp 077, a certain volume is set. It is possible to set the volume
separately for MAIN level and RECORD level.
The range of this setting extends from volume 01 and -79 dB respectively up to 20 and -60
dB respectively. If the setting LAST is chosen, the volume that was last selected will be
used. For security reasons, this is only possible up to a maximum volume of 20 and. -60 dB
respectively.
For the RECORD level this setting is only valid if the REORD level is set to adjustable
volume.
You will find the adjustment options for the MAIN level in the MAIN SETUP in submenu M-
VOL. For the RECORD level Adjustment options are available in the RECORD SETUP in
submenu R-VOL.
For specific instructions please refer to THE SETUP MENUS/ MAIN SETUP and RECORD
SETUP respectively.
The different functions of the headphones are available in the SETUP MENU / PHONES SETUP.
The different functions of the Phono MC and Phono MM module are available in THE SETUP MENU / PHONO
SETUP, THE SETUP MENUS / MC SETUP respectively THE SETUP MENUS / MM SETUP.
16