Functional Overview Of The Preamp; Front Panel - Burmester Top Line Phono preamp 100 Owner's Manual

(1) INPUT LED for chosen input
(2) MC / MM LED indicates the equipped module
(3) IMPEDANCE-/ CAPACITY LEDs
(4) GAIN LEDs indicate the selected gain level
(5) SUBSONIC LEDs indicate status of the filter
(6) OUTPUT LEDs indicate selected amplification
(7) VOLUME LED lights up for variable volume control
(8) VU-METER displays the load of the ADC
(9) OVERFLOW LED shows distortion of the ADC
(10) VU-METER LEDs display the mode of the VU-Meter
(11) ADC LEDs display the sample rate of the ADC
(12) AUTO ADJUST LEDs
(13) INPUT switch key
(14) LOAD switch key changes the capacities or
impedances of the selected input

FUNCTIONAL OVERVIEW OF THE PREAMP

FRONT PANEL

(15) GAIN switch key changes the amplification of
the selected input
(16) SUBSONIC switch key switches the filter
(17) OUTPUT switch key increases the overall
amplification
(18) IR receiver for commands of remote control
(19) DIM / VU-METER switch key to control the
dim and VU-Meter functions
(20) ADC OFF LED lights when the ADC is off
(21) ADC switch key for ADC operation
(22) AUTO ADJUST switch key for auto adjust
function
(23) POWER switch to switch the unit on & off
(24) POWER LED shows operating condition of the
unit
3